Flap Speed Gate

Fujica intelligentized flap barrier is designed to control pedestrian entering or exiting restricted areas, use SS304 stainless steel for the whole case, and adopt anti-damp, dust-proofing, water-proofing international standard design, suitable for both indoors and outdoors.

Flap barrier consists of cabinet、reader module、main control module、motor&driver module、infrared photocell、alarm device、limit switch and voice prompt device etc., can be used for the applications like apartment, factory, museum, station and ferry terminal etc.. Together with intelligent card reader/writer and management software, they are combined as intelligent flap barrier management system, can fulfill the functions like entrance control, time attendance, pedestrian volume control and tolling etc

 

Technical Parameters:

Power consumption	100W
Housing Size	1400*280*950mm
Housing material	1.5--2mm, 304# stainless steel, corosion resistant
Drive motor	DC brushless motor
Channel width	500--600mm
Pass speed	40 persons/min.
IP protection	IP44
Input singal optional	DC12V/dry/contact/RS485/RS232/Remote)
railing-off against power off	Yes
Working enviroment temperature	minors 30°C to 70 °C
Working environments	indoor,outdoor
Relative humidity	≤95% coagulation free
MCBF	2,500,000 cycle

 

System Functionality:

1. Smartcard reader compatible with a variety of card such as IC and ID card.
2. Can be expanded to automatic identification system, realizing function of access control, pedestrian flow control,attendance check or fare collection.
3. Equipped with international standard electrical interface, can be easily integrated with other R/W device, also can be controlled and management through remote supervision computer
4. Equipped with a couple of infrared photocells, alarm at unauthorized entry or tailgating attempts,  together with anti-strike function to protect pedestrian
5. LED gate direction indicator that displays the current operational state to pedestrian. Green arrow for entry free, Red cross for passage locked.
6. Can open the turnstile by two input signals (signals can be input by access controller, button or other equipments)
7. Provide audible sound prompt and information display function.
8. The flaps will open automatically during power interruption, and recover N/C mode after power on(optional)
9. Counting function. Flap closes after passing N pedestrians continuously by swiping card N times correspondingly (N<=16) (optional)
10.Reversed passing alarm function, barrier will alarm if pedestrian pass from opposite direction after reading the card.(optional)

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: